Main Run Screen; Blocked Charge Filter Screen; Water Temperature Screen - Ransomes MP493 Quick Start Manual

MAIN RUN SCREEN

The main screen for operation gives the
operator all the information necessary to
operate the machine. No operator input to
view standard data is needed when you use
the mower.
If an error occurs when the operator has
moved away from this screen, it immediately
returns to this screen.
When a button is pressed, a bar is shown at
the bottom of the screen to give more
options.
Buttons numbered left to right.
Button 1: Screen Brightness and Contrast
Button 2: Up Arrow (Changes time, from
hour meter to time of day)
Button 3: Down Arrow (Changes time, from
time of day to hour meter)
Button 4: Enters the Menu structure.
If there are no more buttons pressed, the
button bar disappears.

WATER TEMPERATURE SCREEN

A
HIGH ENGINE TEMPERATURE
If the temperature increases to 108°C, the
RED LEDs (A) will flash at a rate of two
flashes every four seconds. The warning
1234.5
A
1234.5
QUICK START GUIDE
VISUAL DISPLAY
buzzer will sound at the same rate and the
"CLEAR BUGSCREEN" warning replaces
the centre icons and flashes. Press the
button under the check mark to remove
warning. The RED LED's will flash and the
buzzer continues until the temperature has
decreased to under 108°C. When the
temperature reaches 110°C, the lift / lower
function is stopped and the power take off is
disengaged. The engine will shutdown at
115°C.
This occurrence will also be recorded to
memory, the data recorded is:
Water Temperature limit reached, Date,
Time, Engine Hours, time above 110°C.
Maximum temperature reached during the
fault.

BLOCKED CHARGE FILTER SCREEN

A
BLOCKED CHARGE FILTER
This situation does not cause a fault until the
hydraulic oil is at operating temperature. If
the charge filter is blocked the icon will be
shown, and the RED LED's (A) will flash at a
rate of a 1s flash every 5 seconds. The
buzzer will sound at the same rate one
second every 5 seconds.
The fault will also be recorded to memory,
the data recorded is:
Blocked Charge Filter, Date, Time, Engine
Hours, length of time engine continued to run
after the fault occurred.
A
FAULT
1234.5
en-13