Radio Calls; Selective Radio Inhibit; Receive A Selective Call (Conventional Operation Only) - Motorola PM400 User Manual

RADIO CALLS

SELECTIVE RADIO INHIBIT

Your radio is equipped with a security feature
that can temporarily render the unit inoperative
when an inhibit signal is sent from the base
station.
This feature is commonly used to disable
radios:
• In case of theft
• When your vehicle is being serviced
• For system control reasons
When your radio has been rendered
inoperative by the base station, all controls will
be inoperative except for the On/Off/Volume
knob and the display shows INHIBIT.
RECEIVE A SELECTIVE CALL F
(CONVENTIONAL OPERATION ONLY)
When you receive a Selective Call:
• The display shows F and the prepro-
grammed name or ID of the calling radio.
• The yellow LED indicator flashes, if pro-
grammed by your dealer/programmer.
• You hear two high-pitched tones.
1 To acknowledge the call, press and release the
PTT button.
2
Press and hold the PTT button to talk; release
to listen.
29
English