Radio Calls; Making A Selective Call - Motorola Professional Series User Manual

04_Radio_Calls.fm Page 29 Wednesday, August 3, 2005 3:21 PM

RADIO CALLS

MAKING A SELECTIVE CALL

You can make a selective call to a particular
radio or group or radios, as programmed by
your dealer, using MDC or Quik Call II encode
signaling, provided the receiving radio has the
associated decode capability. DTMF encode
signaling is supported; DTMF decode requires
an additional board assembly in your radio.
To make a Selective Call:
Press the preprogrammed Radio Call button
(see page 11) and proceed to step 4
–
or–
) to enter Menu Mode.
1
m
2 until
) to select
3
m
4 until
) to select
5
All manuals and user guides at all-guides.com
6
7
8
9
Radio Call
Radio Call
Selective Call
Selective Call
m
to locate the desired ID in the Radio Call
List.
–
or–
Enter the ID number of the radio you want to call.
Press
the PTT button to send the call.
The radio sounds a continuous tone, if
programmed by your dealer.
Press the PTT button and talk; release the
PTT button to listen.
(
To return to
Selective Call
–
or–
(
Hold down to exit Menu Mode.
29
Englis