List - Motorola PM400 User Manual

PRIORITIZE A CHANNEL/
TALKGROUP IN A SCAN LIST
You may want to check the activity on one or
two channels/talkgroups more frequently than
others. You can do this by prioritizing them:
Priority
Channel/
Talkgroup
None specified
Channel/
Talkgroup 2
(Priority 1)
Channel/
Talkgroup 2
(Priority 1) and
Channel/
Talkgroup 8
(Priority 2)
Note: If you are receiving on a non-priority
38
English
Scanning Sequence
Ch1 Ch2 Ch3
Ch4 ...Ch1
Ch2 Ch1 Ch2 Ch3
Ch2 Ch4 Ch2 ...Ch1
Ch2 Ch1 Ch8 Ch3
Ch2 Ch4 Ch8 ...Ch1
channel/talkgroup and traffic becomes
active on a priority channel/talkgroup,
your radio will automatically switch to
that priority channel/talkgroup and indi-
cate the activity with a short tone.
Set Priority Channels/Talkgroups
Note: You cannot have the same priority on
two different channels/talkgroups.
D
1 to enter menu mode.
G H
2 or until
D
3
to select
G H
4 or until
D
5 to select
G H
6 or until
D
7
to select
G H
8 or until
– or – until
D
9 to select the desired priority level.
You see the current priority channel/talkgroup.
PROG LST
PROG LST
SCAN LST
SCAN LST
EDIT PRI
EDIT PRI
PRI #1
PRI #2