Motorola PM400 User Manual page 71

Turn the Radio On or Off
1. Rotate the On/Off/Volume Control knob clockwise. You will hear the self-
test pass tone and see the green LED indicator and display icons light
momentarily.
2. Rotate the On/Off/Volume Control knob counterclockwise until you hear
a click and both the display and the LED indicators turn off.
Adjust the Volume
1. Turn the On/Off/Volume Control knob clockwise to increase the volume,
or counterclockwise to decrease the volume.
Select a Conventional Radio Channel
G H
1. or to select the desired channel.
Select an LTR Radio Channel
G H
1. or to select the desired LTR channel/talkgroup.
Receive
1. Turn radio on and adjust volume to the desired level.
2. Select desired channel.
3. Listen for voice activity. The red LED indicator flashes while your radio is
receiving.
Transmit
1. Hold the microphone vertically 1 to 2 inches (2.5 to 5 cm) from your mouth.
Press the PTT button to talk. The red LED indicator lights steady while the
call is being sent.
2. Release PTT button to listen.
Start or Stop System Scan
1. Press the preprogrammed Scan button to start scan. – OR –
select a channel that contains a Scan list. From the Scan menu, select
SCAN ON. The green LED indictor blinks during scan operation.
2. Press the preprogramed Scan button again to stop scan. – OR – from the
Scan menu, select SCAN OFF.
Delete a Nuisance Channel/Talkgroup During Scanning
1. While radio is on a nuisance channel/talkgrop, hold down the prepro-
grammed Nuisance Delete button until you hear a tone.
2. Release Nuisance Delete button.
PM400 ™ Quick Reference Card
Record the functions for your radio's programmable buttons in the table
provided below. For further information, see page 16 of this User Guide.
Channel Selector/
Menu Scroll Buttons
On/Off/Volume
Knob
Microphone
Jack
G H
or to
Button Function
Red/Yellow/Green
LED Indicators
Display
PERS4
PM400
P1 P2 P3 P4
Programmable
Menu Buttons
Buttons (P1, P2, P3, P4))
(P1, P2)
Short Press Long Press
Speaker
Hold Down Page