Minimum Inches Clearance To Combustible Construction - Carrier WeatherMaker 8000 Product Data

This forced air furn
n atural gas at altitudes 0 - 10,000 ft (0-3,050m).
An accessory kit, supplied by the m
s
hall be used to convert to propane gas use or
m may be required for some natural gas applications.
This furnace is for indoor installation in
building constructed on site.
This f
f l oor ing in alcove or closet at minimum clearance
f r om combustible material.
This furnace ma
a nd may be vented in common with other gas-fired
a ppliances.
#
##
®
A PP R O VED
R
8

MINIMUM INCHES CLEARANCE TO COMBUSTIBLE CONSTRUCTION

ace is equipped for use with
anufacturer,
urnace may be install ed on combustible
y be used with a Type B-1 Vent
For furnaces wider than 14.25 inches
(362mm) may be 0 inches.
For single wall vent type 6 inches.
For Type B-1 vent type 3 inches.
ama
This furnace is approved for UPFLOW installations only.
1"
0"
B
A
C K
F R
O N
1" #
Clearance in inches.
Vent Clearance to combustibles:
For Single Wall vents 6 inches (6 po).
For Type B-1 vent type 1 inch (1 po).
MEETS DOE RESIDENTIAL
CONSERVATION SERVICES
PROGRAM STANDARDS.
Before purchasing this appliance, read important
energy cost and efficiency information available
from your retailers.
REGISTERED
QUALITY SYSTEM
1"
#
S E
R V
I
C
E
30"
T
MIN
##
320325-101 REV. H
A98122E