Wlan Module - HP ProOne 400 G1 Maintenance & Service Manual

WLAN module

Description
HP WLAN 802.11 a/b/g/n + Bluetooth 4.0
HP WLAN 802.11 a/b/g/n, 2x2
The WLAN module is located on the upper right corner of the system board. The module is secured
with one Phillips screw and has two connected antennas.
To remove the WLAN module:
1. Prepare the computer for disassembly (see
2. Remove the rear cover (see
3. Remove the VESA panel (see
4. Remove the system board shield (see
5. Disconnect the antenna cables from the module (1).
6. Remove the Phillips screw (2) that secures the module to the computer.
Preparing to disassemble the computer on page
Rear cover on page 30).
VESA panel on page
System board shield on page
55).
56).
27).
WLAN module
69