HP ProOne 400 G1 Maintenance & Service Manual page 85

4. Go to Security > System ID's.
5.
If necessary, press
6.
Edit the fields listed. If the feature byte has data or is not editable, then it was not cleared and
cannot be edited.
System ID Setup Page
Setup Field Name
Product Name Enter the Model name/number or marketing name.
Serial Number Enter the Serial Number of Unit.
SKU Number Enter the SKU or Product Number including Localization Code.
Asset Tag Enter the 18-byte identifier assigned to the computer.
Feature Byte Enter the Feature Byte string. The feature byte string is case sensitive.
The label includes spaces after every four characters. You can enter or ignore
these spaces – their only purpose is to help with data entry. There is a
character limitation of 40 bytes per line. When you reach this limit, go to the
next line to continue data entry. BIOS ignores the spaces and lines.
If you make an error during data entry, the data will not validate, and the
computer asks you to correct your data input.
Build ID The Build ID of the unit.
Ctrl+A to initiate edit mode.
Comment Label
Flexbuild
Support
Support
Support
Flexbuild
Flexbuild
System board
75