Table of Contents
Advertisement
i2000 UserÕs Guide
MAKING GROUP CALLS (IDEN
ONLY)
A Group Call allows you to communicate instantly with members of a
selected TalkgroupÐa pre-deÞned set of people who share a
communication need.
Talkgroups appear on your display as numbers or programmed names,
such as Talkgrp10 or Sales Team.
To make a Group Call:
M
1. Press
o
d
displays. Your most recently used
talkgroup displays, for example,
ÒTalkgrp 10Ó.
2. To place a call, do one of the following:
¥ To speak to this talkgroup, press and
hold the PTT button. Wait for the
chirp, then speak into the microphone.
¥ To speak to another talkgroup, press
desired talkgroup name. Press and hold the PTT button.Wait for
the chirp, then speak into the microphone.
3. To listen, release the PTT button.
Receiving a Group Call
When you receive an incoming Group call, you will hear a brief chirp-
like tone. Your i2000 phone automatically switches to Group mode, and
the Talkgroup name displays.
1. Your phone must be idle, that is, not busy in an active call.
2. Wait for the caller to Þnish speaking, then press and hold the PTT
button. Begin speaking after you hear the chirp.
3. To listen, release the PTT button.
You can receive group calls only in the Talkgroups that you have
predeÞned. For more information, see ÒAdding or Storing a TalkgroupÓ
on page 45.
until ÒGroup ReadyÓ
e
Group Ready
Talkgrp 10
Alert
Mail
until you see the
Advertisement
Table of Contents
