Table of Contents
Advertisement
i2000 UserÕs Guide
TRAVELING BETWEEN SYSTEMS
When you travel, you may have to change the phone system setting. You
can choose from six phone system settings:
¥ Last activeÑuseful when you move between iDEN and GSM
systems that do not overlap, for example, traveling between New
York and Paris. If your i2000 phone cannot locate the last system, for
example, iDEN, it attempts to locate the other system, GSM.
¥ RoamÑuseful when you are in an overlapping system-coverage area
and have no preference for either system. This selection causes your
i2000 phone to switch between iDEN and GSM until it Þnds an
acceptable network.
¥ iDEN preferredÑuseful if your home system is iDEN and you are in
a country or region where GSM coverage is also available. Your
i2000 phone always searches Þrst for iDEN networks.
¥ iDEN onlyÑuseful when you are in an area that is covered by iDEN
and GSM, but you want to use iDEN. Your i2000 phone attempts to
register only on iDEN networks.
¥ GSM preferredÑuseful if your home system is GSM and you are in
a country or region where iDEN coverage is also available. Your
i2000 phone always searches Þrst for GSM networks.
¥ GSM onlyÑuseful when you are in an area that is covered by iDEN
and GSM, but you want to use GSM. Your i2000 phone attempts to
register only on GSM networks.
To reselect the phone system:
1. Press
menu option.
2. Select ÒPrgmÓ.
3. Press
4. Press
system.
5. Select ÒOKÓ.
Searching for a Network
While you are on a GSM network, you can perform an automatic or
manual search for available networks. A manual search allows you to
view the available networks and make a selection rather than use the
network automatically selected by the phone.
1. Press
2. Select ÒPrgmÓ.
until you see the ÒPrgmÓ
,
, then select ÒOKÓ.
until you see the desired
until you see the ÒPrgmÓ menu selection.
55=Phone Sys
iDEN Preferred
Exit
OK
Phone System
Last Active
Cancl
OK
Advertisement
Table of Contents
