Table of Contents
Advertisement
6. Select ÒExitÓ to return to the Vibrate Alert
menu.
7. Select ÒExitÓ again to return to the
previous mode.
Keypad Lock
On your i2000 phone you may lock your keypad in Phone Mode so
inadvertent key presses will not result in digits being dialed or a phone call
being placed. When in Phone Mode, pressing
simultaneously will activate the Keypad Lock. While the keypad is locked,
the only keys that may be pressed are
followed by
be automatically suspended if the i2000 phone receives a Phone, Private, or
Group call. At the end of the call, the keypad lock will be automatically re-
activated.
N O T E :
Setting the Ringer Volume
You can adjust the ringer volume for incoming calls. If you have a
second phone line, you must set each line separately. Be sure to select
the desired line before setting the volume.
1. From the Phone Ready screen, press
ÒPrgmÓ menu option.
2. Select ÒPrgmÓ
3. Press
VolumeÓ screen displays.
The display shows your current ringer
volume.
4. Press the Volume Control buttons on the
side of the phone to listen as you raise or
lower the volume. At the lowest setting,
the screen displays ÒVolume SilentÓ.
5. When you reach the desired level, select
ÒExitÓ.
Selecting a Ring Style
Your phone has nine selectable ring styles. Phones with two phone lines
can use the same or different ring styles for each phone line.
to turn off the keypad lock. The keypad lock will
Emergency Calls cannot be placed while the keypad
lock is active.
,
. The Ò30=Ringer
Making Phone Calls
Group/Prvt
Vibe:Off
Exit
and
to turn off your phone, or the
until you see the
30=Ringer
Volume
Exit
On
Advertisement
Table of Contents
