Table of Contents
Advertisement
i2000 UserÕs Guide
Unblocking the PIN
If you forget your PIN and try, unsuccessfully,
to enter it three times, access to your i2000
phone with that SIM will be blocked. To gain
access, you must Þrst unblock the PIN.
To unblock the PIN:
1. Call your carrier for your PUK (PIN
unblock code).
2. At the ÒEnter PUKÓ screen, enter your
PIN Unblocking Key (PUK). As you
enter it, an asterisk appears for each
character. This prevents others from
seeing your PUK.
3. Select ÒOKÓ.
4. At the ÒNew PINÓ screen, enter a new
PIN.
5. Select ÒOK.
6. At the ÒRepeat New PINÓ screen, enter
the new PIN again.
7. Select ÒOKÓ. After the SIM stores your
new PIN, your phone is ready for normal
use.
N O T E
Changing the PIN
To change your SIM card PIN:
1. From the Phone Ready screen, press
ÒPrgmÓ menu option.
2. Select ÒPrgmÓ.
3. Press
4. Select ÒOKÓ. At the ÒChange SIM
PIN?Ó screen, select ÒOKÓ.
5. At the ÒOld PINÓ screen, enter your
current PIN then select ÒOKÓ.
If you unsuccessfully enter the PUK number ten
times, the PUK is blocked. If this happens, you will get
a message to call your service provider.
Depending on the network that you are on, you may
be able to make emergency calls without a SIM card.
,
PIN Blocked
Call Your
Provider
Name
Mail
Enter PUK
**_______
Cancl
New PIN
**_______
Cancl
until you see the
46=Change
SIM PIN
Exit
OK
OK
OK
Advertisement
Table of Contents
