Transmission Installation - Polaris Ranger RZR XP 900 2011 Service Manual

TRANSMISSION
Transmission Installation
1. With the help of an assistant, position the rear of the
transmission into the vehicle frame through the left rear
wheel well area.
2. Slide transmission towards the rear of the vehicle while
lifting the front ofthe transmission upward. Rotate the front
of the transmission towards the engine. When in position,
lower the front of the transmission.
4. Install the (2) rear exhaust springs securing the muffler to
the rear transmission mounting bracket.
5. Install the Clutch Center Distance Tool (PU-50658) onto
the crankshaft and transmission input shaft to properly
position the clutch center distance. The pictures below
show the tool (PU-50658) properly installed.
6. Align coupler and front transmission mounting holes.
3. Install the rear transmission mount assemblies. Torque all
fasteners to specification.
n
":~~==::'?J
17 ft. Ibs.
-=-
(23 Nm)
q§l..•..
8.8
Transmission
New Nuts (2)
New
ThroU9h-~~
.~()5~;2Y
()~
~",-,,-
.,/ .""" Threaded Spacer
Jam Nut
.... ~
• • •••
~~A
•
v~
/
/~'"
/,
Coupler . {
9923144 - 2011 RANGER RZR XP 900 Service Manual
© Copyright 2011 Polaris Sales Inc.