Polaris Ranger RZR XP 900 2011 Service Manual page 253

A
CAUTION
New bolts have a pre-applied locking agent
which is destroyed upon removal. Always use
new brake caliper mounting bolts
upon assembly.
FINAL DRIVE
C
=T
Wheel Hub Castle Nut:
80 ft. Ibs. (108 Nm)
10. Install wheel and (4) wheel nuts. Torque wheel nuts to
specification.
7. Install the steering tie rod end onto the front bearing carrier.
NOTE: Refer to the photos below to ensure proper
placement of the tie rod end.
8. Torque the tie rod end fastener to specification and install
a new cotter pin.
C
=T
Tie Rod End Fastener:
42.5 ft. Ibs. (58 Nm)
9. Torque wheel hub nut to specification and install a new
cotter pin. Tighten nut slightly if necessary to align cotter
pin holes. Bend both ends of cotter pin around end of
spindle in different directions.
C
=T
Wheel Nuts:
30 ft. Ibs. (41 Nm) + 90° (1/4 turn)
11. Rotate wheel and check for smooth operation.
I
7.5
9923144 - 2011 RANGER RZR XP 900 Service Manual
© Copyright 2011 Polaris Sales Inc.