Shift Lever - Polaris Ranger RZR XP 900 2011 Service Manual

TRANSMISSION
SHIFT LEVER
Removal
4. Remove the retaining ring and slide the shift lever off the
mounting bracket and out from the frame.
Bushings
Shift
Lever
Snap
Ring
~a
~
~cover
~
screw
n
~
Shift
'[Jr
Knob
Shift
~Lever
1. Remove the shift knob cover, retaining screw and shift
knob from the shift lever.
2. Remove the screws retaining the center console using a T27
and T30 Torx driver. Remove the console from the vehicle.
5. Remove both bushings from the shift lever and service as
needed.
3. Remove the clip and washer retaining the shift cable to the
shift lever and disconnect the cable end from the lever.
Installation
1. Perform the removal steps in reverse order to install the
gear shift lever (lever, cable, console, shift knob).
I
Bushings
~Cover
~
screw
n
~
Shift
~
Knob
Shift
Lever
Shift
Cable
Nut
\
Snap
Ring
~~ ---~--- ~
[j
. . . . . . . . . . . . . . . . «l
,
~~
---
------
~sher
Clip
Shift
Lever
---
Shift
Cable
~~
._-------
--
,~~
~sher
Clip
8.3
9923144 - 2011 RANGER RZR XP 900 Service Manual
© Copyright 2011 Polaris Sales Inc.