Snapshot Mode Timeout; Snapshot Aiming Pattern - Symbol DS6707 Product Reference Manual

5 - 10 Symbol DS6707 Digital Imager Scanner Product Reference Guide

Snapshot Mode Timeout

Parameter # F0h, 43h
This parameter sets the amount of time the digital imager scanner remains in Snapshot Mode. The digital imager
scanner exits Snapshot Mode when you pull the trigger, or when the Snapshot Mode Timeout elapses. To set this
timeout value, scan the bar code below followed by a bar code from
value is 0 which represents 30 seconds; values increment by 30. For example, 1 = 60 seconds, 2 = 90 seconds,
etc.

Snapshot Aiming Pattern

Parameter # F0h, 2Ch
Select Enable Snapshot Aiming Pattern to project the aiming pattern when in Snapshot Mode, or Disable
Snapshot Aiming Pattern to turn the aiming pattern off.
*
Enable Snapshot Aiming Pattern
(01h)
Appendix D, Numeric Bar
Snapshot Mode Timeout
Disable Snapshot Aiming Pattern
(00h)
Codes. The default