Scanning Sequence Examples; Errors While Scanning; Imaging Preferences Parameter Defaults - Symbol DS6707 Product Reference Manual

Digital imager scanner
Hide thumbs Also See for SYMBOL DS6707:
Table of Contents

Advertisement

5 - 2
Symbol DS6707 Digital Imager Scanner Product Reference Guide

Scanning Sequence Examples

In most cases scanning one bar code sets the parameter value. For example, to disable the decode aiming pattern,
scan the Disable Decode Aiming Pattern bar code under
imager scanner issues a fast warble beep and the LED turns green, signifying a successful parameter entry.
Other parameters require scanning several bar codes. See these parameter descriptions for this procedure.

Errors While Scanning

Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

Imaging Preferences Parameter Defaults

Table 5-1
lists the defaults for imaging preferences parameters. There are two ways to change the default values:
Scan the appropriate bar codes in this guide. These new values replace the standard default values in
memory. To recall the default parameter values, scan the
Download data through the device's serial port using SSI. Hexadecimal parameter numbers appear in this
chapter below the parameter title, and options appear in parenthesis beneath the accompanying bar codes.
See the Simple Serial Interface (SSI) Programmer's Guide for detailed instructions for changing parameters
using this method.
NOTE See
miscellaneous default parameters.
Imaging Preferences Parameter Defaults
Table 5-1
Parameter
Imaging Preferences
Operational Modes
Low Light Enhancement
Presentation Mode Field of View
Image Capture Autoexposure
Image Capture Illumination
Illumination Bank Control
Fixed Exposure
Fixed Gain
Gain / Exposure Priority for Snapshot Mode
Snapshot Mode Timeout
Appendix A, Standard Default Parameters
Decode Aiming Pattern on page
Set Default Parameter on page
for all user preferences, hosts, symbologies, and
Parameter
Number
N/A
N/A
F1h 64h
Disable
F1h 61h
Default (Reduced)
F0h 68h
Enable
F0h 69h
Enable
F1h 3Bh
Full
F4h F1h 37h
100
F1h 38h
50
F1h 32h
Autodetect
F0h 43h
0 (30 seconds)
4-13. The digital
4-4.
Page
Default
Number
5-4
5-5
5-5
5-6
5-6
5-7
5-8
5-8
5-9
5-10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents