Canon CanoScan 9900F Service Manual page 83

* Scan count
Set the number to be scanned ranging from 1 to 100.
* Resolution (dpi)
When the resolution for scanning an image is set at 67/200/400dpi, the entire area of
the document glass is scanned. When set at 800/1600/3200dpi, the are of 5mm
in width from the reference sheet of the document glass is scanned.
* Image handling
When "Read in memory (no file)" is selected, the image is read into the memory and be
destroyed.
When "Save to TIFF file" is selected, the image is stored in the file called "img0.tif" in the
folder of the Canon Scanner Test.
When scan count is set at 2 or larger number, the scanned images are saved in more than
one file including "img0.tif" file, "img1.tif" file , and "img2.tif" file.
File space to be saved is as follow:
67 dpi : 1.3MB, 200 dpi : 11.2 MB, 400 dpi : 44.9 MB
800 dpi : 2.4 MB, 1600 dpi : 9.7 MB, 3200 dpi : 29.3 MB
Note : Make sure that there are more disk space on HDD with Canon Scanner Test
installed than ones specified above before scanning.
COPYRIGHT 2003 CANON INC. CANOSCAN 9900F REV.0 FEB. 2003 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5
5 - 13