Removing The Front Panel - Canon CanoScan 9900F Service Manual

D. Removing the Front Panel
1) Remove the Front Panel from the scanner.
(Refer to III-A Removing the Main PCB)
2) Remove the Top Cover and the Document Glass.
3) Remove the Carriage Unit and the Motor Unit
(Refer to IV OPTICAL SYSTEM)
4) Remove a long screw in the center and two short screws on the edge.
5) Press two hooks until they make a snapping sound.
2
q Hook
w Screw
e Long Screw
COPYRIGHT 2003 CANON INC. CANOSCAN 9900F REV.0 FEB. 2003 PRINTED IN JAPAN (IMPRIME AU JAPON)
1
2
3
Figure 3-4
CHAPTER 3
3 - 5