C. Connecting Cables - Canon CanoScan 9900F Service Manual

C. Connecting Cables

CanoScan 9900F needs to be connected to the USB port on the host computer. For details,
refer to the "Quick Start Guide" that comes with the product. As for connecting the host
computer's cables to the scanner, refer to the host computer' manual.
Note: Install the device driver before connecting the cables.
1. Connecting FAU Cable, USB Cable, IEEE 1394 Cable and AC Adapter Cable
1) Connect the FAU cable to the FAU connector.
2) Connect the scanner with the host compter by either USB Cable or IEEE1394 Cable.
Note: IEEE1394 Cable is not included. Use recommended cables.
3) Connect the AC adapter cable to the power connector on the scanner.
q USB Connector
w IEEE-1394 Connector
e Power Connector
r USB Cable
t IEEE-1394 Cable
y AC Adapter
COPYRIGHT 2003 CANON INC. CANOSCAN 9900F REV.0 FEB. 2003 PRINTED IN JAPAN (IMPRIME AU JAPON)
1
2
3
6
5 4
Figure 1-4
CHAPTER 1
1 - 5