Daikin FTKS20CVMB Service Manual page 116

SiENBE04-401A
Check Method 2
1. Enter the diagnosis mode.
2. Press the TEMP button.
3. Diagnose by the sound.
4. Enter the diagnosis mode again.
Service Diagnosis
Press the 3 buttons (TEMP
The digit of the number of tens blinks.
HTry again from the start when the digit does not blink.
Press TEMP s or TEMP t and change the digit until you hear the sound of "beep" or "pi pi".
H" pi " : The number of tens does not accord with the error code.
H" pi pi " : The number of tens accords with the error code.
H" beep " : The both numbers of tens and units accord with the error code. (
Press the MODE button.
The digit of the number of units blinks.
s ,TEMP t , MODE) simultaneously.
Service Check Function
(R4086)
(R4087)
(R4088)
→
See 7.)
(R4089)
(R4090)
107