Installation Support; Legal Disclaimer; Mounting The Odus - Motorola PTP 400 Series User Manual

7.4

Installation Support

Online installation support and contact details for your regional support can be found at
http://www.motorola.com/ptp
A Frequently Asked Questions (FAQ) section can be found in section 16.
7.5

Legal Disclaimer

IN NO EVENT SHALL MOTOROLA, INC. BE LIABLE FOR ANY INJURY TO ANY PERSONS
OR ANY DAMAGE CAUSED DURING THE INSTALLATION OF THE MOTOROLA PTP 400
SERIES PRODUCT.
7.6 Mounting the ODU
The ODU mounting bracket is designed to ease installation by fixing the bracket to the pole
and then bringing the ODU into position using a single bolt fixing. The ODU should be
mounted using the following steps ensuring that the cable entry is at the bottom:
The ODU mounting bracket is designed to work with poles with diameters in the range 50mm
(2") to 75mm (3").
Step 1: Mount the bracket to the pole.
Pole diameters of 25mm (1") to 50mm (2") can be accommodated by inverting the back of the
bracket as shown in Figure 16.
s
50
Step 2: Mate the unit to the bracket and
tighten the nut and bolt.