What You Need To Supply; Installation Procedure - Motorola DSP96002ADM User Manual

Quick Start Guide

Installation Procedure

1.2.2

What You Need to Supply

• Motorola Application Development System with appropriate host interface card
• Host Computer system:
– PC-compatible computer (386 class or higher) running PC-DOS or MS-DOS
version 5.0 or later with 8 Mbytes RAM, one open 16-bit ISA expansion slot,
free I/O addresses ($100–$102, $200–202, or $300–$303), CD-ROM drive, hard
drive with 4 Mbyte of free disk space, and a mouse
– Sun Microsystems Sun 4 Workstation running Sun Operating System Release
4.1.1 or later (or Solaris Release 2.5 or later), one open SBus expansion slot,
CD-ROM drive, and a mouse
– Hewlett Packard HP7xx Workstation running HPUX Version 9.x (Version 10.x
is not supported), one open EISA expansion slot, CD-ROM drive, and a
mouse.
1.3

INSTALLATION PROCEDURE

Installation requires the following steps:
1. Using information provided in the Motorola Application Development System
User's Manual, install the Motorola Application Development System in the host
computer.
2. Prepare the DSP96002ADM board
3. Connect the board to the external Command Converter card
1-4 DSP96002ADMUM/AD, Preliminary MOTOROLA