Specifications; System Specifications; Wireless 4.9Ghz Variant - Motorola PTP 400 Series User Manual

18

Specifications

18.1 System Specifications

18.1.1 Wireless 4.9GHz Variant

Radio Technology
RF Band
Channel Selection
Dynamic Frequency
Control
Channel size
Tx power @ Antenna ports
Transmit Power Control
Manual Power Control
Receiver Noise Figure
Note: Power limits are subject to regulatory approval, currently pending.
29
As specified by FCC Part 90.1215 and RSS211
Specification
4.940-4990 MHz
By dynamic frequency control and manual intervention
Automatic detection on start-up and continual adaptation to
avoid interference.
Initial capture 10-15 sec. Out of service on interference 100
ms. (+60 seconds when Radar Detection is operational)
10 MHz
Mode
BPSK Mode
QPSK Modes
16QAM Modes
64QAM Modes
Loop bandwidth 1 Hz, Range 30dB typical
Maximum power can be controlled lower than the power
limits shown above in order to control interference to other
users of the band.
Typically 6 dB
190
Maximum Power Output
29
(region dependant)
23 dBm
22 dBm
19 dBm
19 dBm