Alarms; Memory Of Alarm; Phone Access & Voice Response; Paging Feature - AMERITECH AM100 User Manual

SYSTEM OVERVIEW

Alarms

When an alarm occurs, both the keypad and external sounders will sound, and the
keypad will display the zone(s) causing the alarm. If your system is connected to a
central monitoring station, an alarm message will also be sent. To stop the alarm
sounding, simply disarm the system.

Memory of Alarm

When an alarm condition occurs, the keypad displays the number(s) of the zone(s)
that caused the problem, and displays the type of alarm (ex. FIRE, ALARM). It
remains displayed until it is cleared by disarming the system (see DISARMING
THE SYSTEM section).
Phone Access &
Your system may include a voice module that will permit you to access the system
Voice
via a Touch-tone phone, either on-premises or by call-in when away. The phone
Response
access feature will enable you to do the following:
Capability
• Receive synthesized voice messages over the telephone regarding the status
• Arm and disarm the system and perform most function commands via the
Complete information regarding the use of this feature is provided in a separate
manual entitled PHONE ACCESS USER'S GUIDE, which accompanies the voice
module.

Paging Feature

If the paging feature has been programmed for your system, your pager will
respond to certain conditions as they occur in your system. Your pager will display
code numbers indicating the type of condition that has occurred. Refer to the
PAGING FEATURE section later in this manual for detailed information.
of the security system.
telephone, with voice confirmation provided after each command entry.
– –
6
(cont'd)