Table of Contents
Advertisement
ARMING ALL PROTECTION
Use this key when no one will be staying on the premises.
Using the
2
Key
When armed in AWAY mode, the system will sound an alarm if a protected door
AWAY
or window is opened, or if any movement is detected inside the premises. You may
leave through the entrance door during the exit delay period without causing an
alarm. You may also re-enter through the entrance door, but must disarm the
system within the entry delay period or an alarm will occur.
Close all protected perimeter windows and doors before arming (see
CHECKING FOR OPEN ZONES section). The green READY indicator (if present)
on the keypad should be lit if the system is ready to be armed.
1.
or for quick arming
2.
(With Entry Delay ON)
+
2
(Security Code)
AWAY
A RM ED ** A W AY * *
Y O U M AY EX I T N O W
–
ENTER SECURITY CODE THEN PRESS AWAY
Example: 7 2 9 6
then press the AWAY key if using
the AM6128 keypad.
PRESS THE "A" KEY (ON AWAY) for 2 seconds if
using the AM6139 keypad.
LISTEN
The keypad will beep twice, or beep continuously if
exit warning has been programmed for your system,
and displays the armed AWAY message. The red
ARMED indicator also lights.
The "You May Exit Now" portion of the message
disappears
when
the
–
17
exit
delay
expires.
Hide quick links:
Advertisement
Table of Contents
