Security Codes; General; Babysitter Code; Duress Code - AMERITECH AM100 User Manual

Hide thumbs Also See for AM100:
Table of Contents

Advertisement

General

As an additional safety feature, other users who do not have a need to know your
Information
code can be assigned different security codes. These secondary users are identified
by "user numbers," which are selected when assigning a user's security code. You
can assign up to 14 additional user codes (user numbers 03-16), including the
babysitter and duress codes. Note that the master (primary) user of the system is
the only one who can assign codes to secondary (or temporary) users, and is user
number 02; user number 01 is reserved for the installer of the system.
All codes can be used interchangeably when performing system functions (a
system armed with one user's code can be disarmed by another user's code), with
the exception of the babysitter code described below.
Babysitter Code This code can be used to arm the system, but cannot disarm the system unless the
system was armed with this code. This code is typically assigned to someone (such
as a babysitter) who has a need to arm/disarm the system only at certain times.
The babysitter code is assigned to user 15. The user of this code should not use the
"Quick Arming" feature described below.

Duress Code

This feature is intended for use when you are forced to disarm or arm the system
under threat. When used, the system will act normally, but can silently notify the
alarm monitoring company of your situation, if that service has been provided.
Duress code is assigned to user 16.
Important: This code is useful only when the system is connected to a alarm
monitoring company.

Quick Arming

The
#
place of the security code when arming the system if using the AM6128 keypad. If
using the AM6139 keypad, it is only necessary to press a single button; the A (ON
AWAY) or B (ON HOME), or C (ON INSTANT) button to arm the security system.
The security code must always be used to disarm the system irrespective of the
keypad used.

SECURITY CODES

key followed by the key of the arming mode you wish, can be pressed in
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents