Using The Keyswitch; General; Arming/Disarming - AMERITECH AM100 User Manual

USING THE KEYSWITCH

General

Your system is equipped with a keyswitch for use when arming and disarming. A
red and green light on the keyswitch plate indicate the status of your system as
follows:
Green Light: This indicator lights when the system is disarmed and ready
Red Light:
To arm in the AWAY mode, turn the key to
Arming/
Disarming the right for 1/2 second and release. Keypad
will beep twice and the red light will stay on
steady.
To arm in the HOME mode, turn the key to
the right and hold for longer than 1 second,
then release. Keypad will beep three times and
the red light will flash slowly.
To disarm the system, turn the key to the
right and release. If an alarm has occurred,
the red light will be flashing rapidly (memory
of alarm).
to be armed (no open zones). If the system is disarmed and the
green light is off, it indicates the system is not ready (one or
more zones are open).
This indicator lights when the system is armed or memory of
alarm exists.
Lit Steady: System is armed in AWAY mode.
Slow Flashing: System is armed in HOME mode.
Rapid Flashing: Memory of alarm, indicating an alarm
has occurred.
– –
26
GREEN
RED