Set Up System Features - AT&T 964 User Manual

INSTALLATION
Two Two-Line Jacks
•
Modular
Telephone Jack
Lines 3 and 4
Telephone Jack Aux L4
Telephone Jack Aux L3
14
Modular
Telephone Jack
Lines 1 and 2
Standard
Electrical
Outlet
Power Cord
Telephone Jack L1/L2
Telephone Jack L3/L4

SET UP SYSTEM FEATURES

Use the Navigation buttons to program or change the system features setup.
Store your
selection and
move to next
feature
Enter
Programming
mode
Press G to enter the Programming mode. The screen displays:
•
NOTE: If you do not press a key to continue programming within
20 seconds, the system automatically exits the Programming mode.
• Press - or + repeatedly to move through the list of options.
Press > to choose the option currently displayed.
•
Press S to store your selections and return to the 'home screen'
•
for the feature currently displayed.
You can set up one feature at a time or you can set up a feature and then
move on to set up another feature. After you change one feature, press
+ or - to select another feature. When you are finished with features
setup, press E to exit Programming mode.
NOTE: After a feature is successfully programmed, the system beeps
once. If the system beeps twice, repeat the steps to set up the feature.
Scroll through
options
Confirm
option choice
Used when
resetting
features to
default settings
Exit Programming
mode
Feature
Options
15