Svg2500 Battery; Battery Controller Page - Motorola SURFBOARD SVG2500 User Manual

12 SVG2500 BATTERY PAGES
The Battery pages show varying status information on the batteries
installed in the SVG2500.
You can click any Battery submenu option to view the status
information for that option.
NOTE: A backup battery is not available for some models of the SVG2500.

Battery Controller Page

This page displays the status of the SVG2500 battery controller.
Field
Driver
Built
Current Power Source
Number of Batteries
Input Voltage
Temperature
Estimated Time Remaining
Description
Shows the Revision Level of the PICO microcode. The PICO is the
module within the BCM3368 that is responsible for managing the
battery charge and discharge circuitry.
Shows the date and time of the PICO microcode build used by the
unit.
Shows the active power source for the unit as utility (when operating
on AC) or battery.
Shows the number of batteries currently installed in the battery pack.
Shows the current voltage (mV) being supplied to the unit by the
active power source.
Shows the current internal temperature (degrees Celsius) of the unit,
as measured by the temperature-sensing resistor.
Shows the estimated time left before the battery power is depleted.
120