Rear Panel - Motorola SURFBOARD SVG2500 User Manual

1 OVERVIEW

Rear Panel

The rear panel contains cabling connectors and the power receptacle.
Key Item
1 ANT 1
ANT 2
2 POWER
3 CABLE
4
REBOOT EMTA
5 USB
6
ETHERNET
1 2 3 4
7 TEL 2
TEL1/2
Description
Removable, adjustable antenna. If necessary, contact your Internet
Service provider about obtaining an optional Motorola wireless high gain
antenna to increase your wireless LAN performance and coverage.
Use the DC power plug from the SVG2500 DC power supply to connect
to the AC power outlet.
Use the cable connector to connect to the coaxial cable outlet.
If you experience a problem, you can push this recessed button to restart
the SVG2500 (for additional information, see Troubleshooting). To reset all
values to their defaults, hold down the button for more than five seconds.
Resetting may take 5 to 30 minutes because the SVG2500 must find and
lock on the appropriate communications channels.
®
For Windows only, use the USB port to connect a PC to the SVG2500.
You cannot connect a Macintosh or UNIX
USB port.
Use any Ethernet port to connect an Ethernet LAN cable with RJ-45
connectors to an Ethernet-equipped computer, hub, bridge, switch, or
®
Xbox or PlayStation 2 gaming console.
Use to connect a single telephone.
Use to connect a single or two-line telephone.
9
® computer to the SVG2500