Motorola SURFBOARD SVG2500 User Manual page 127

Wireless voice gateway
Hide thumbs Also See for SURFBOARD SVG2500:
Table of Contents

Advertisement

10 SVG2500 VPN PAGES
Field
Remote Endpoint Settings
Address group type
Identity type
Identity
Network address
type
Remote Address
Description
Set the remote VPN access group to one of the following group
types:
Single IP address — for one computer, enter the IP address
for the specific computer
IP address range — for a small range of computers, enter
the starting and ending IP addresses for the group of
consecutive IP address that will have access to the VPN
tunnel.
IP Subnet — for an entire subnet/network, enter the Subnet
and Mask
For IP address range and IP Subnet, enter the starting and ending
IP addresses for the group of consecutive IP address that will have
access to the VPN tunnel.
The remote VPN endpoint on the other side of the tunnel should
match the settings here for its local endpoint settings.
You can define the remote endpoint identity type to automatically
use the remote endpoint IP address, or as a user specified IP
address, fully qualified domain name (FQDN), or e-mail address.
This is the identity that the far endpoint will use for identification of
the VPN termination point and handshake.
The remote VPN endpoint on the other side of the tunnel should
match the settings here for its local endpoint settings.
Once the identity type is selected, enter the identity string here.
For IP address, enter x.x.x.x.
For FQDN, enter yourdomain.com
For email address identity, enter yourname@yourdomain.com
The remote VPN endpoint on the other side of the tunnel should
match the settings here for its local endpoint settings.
Select the remote endpoint's WAN address type: IP address or
Fully Qualified Domain Name (FQDN)
Enter either the IP address of the remote endpoint or its FQDN.
112

Advertisement

Table of Contents
loading

Table of Contents