2 INSTALLATION
7. Click Yes to continue the installation. The Found New Hardware Wizard window is
displayed.
8. Click Finish to complete the installation.
When you finish installing the USB driver, you can continue with
If you have any difficulties installing the USB driver, perform
Driver in Windows 2000
Installing the Windows XP USB Driver
1. Insert the SVG2500 Installation CD-ROM in the CD-ROM drive. This CD contains
the USB drivers and must be inserted and read by the PC before you connect the
SVG2500 to the PC.
2. Connect the USB cable as shown in
A few seconds after you complete the USB connection, the Found New
Hardware Wizard window is displayed.
and repeat the setup procedure.
Connecting a PC to the SVG2500 USB Port.
27
Configuring TCP/IP
Removing the USB
.