SECTION 3
3-30
Field
LAN Private Host
Name
Host Table
Networking - Routing
You can define up to 20 static routes that specify the Destination IP,
Subnet Mask, Gateway, Interface, and Metric (how many hops). You
configure the Network Routing Table here. The IP address entered
must be a Static IP address.
RIP (Routing Information Protocol) versions 1 and 2 are routing
protocols that are part of the TCP/IP protocol standard. RIP
dynamically determines a route based on the smallest hop count
between source and destination.
To access the screen, click Networking > Routing.
Field
RIP V1
SECTION 3, CONFIGURATION
Description
Displays the current Host name for the router.
The default is "wr850g" (all lower case, without
quotation marks).
Displays the current active Host Name and its
associated IP address.
Description
Enables or disables RIPv1.
The default is disabled.
CONFIGURATION