Led Description - Motorola WR850G User Manual

SECTION 1
LED Condition
1 Power ON
Blinking
Blinking/OFF
2 Modem OFF
ON
Blinking
ON/Blinking
ON/Blinking
3 Wireless OFF
ON
ON/Blinking
ON/Blinking
4 LAN (x4) OFF
ON/Blinking
ON/Blinking
1-10

LED Description

The underlined items represent network activity.
Color Status
Green The device is powered on and operating normally.
Green Firmware update is in progress.
Red The power LED turns RED as soon as the reset
button is depressed. If the reset button is held down
for more than 5 seconds, the LED starts to blink
and the router's default user name, password,
private LAN IP address, and private subnet mask
address will be restored. The LED then turns off
until the reset button is released. The power LED
keeps blinking RED if the firmware is corrupted,
indicating the firmware needs to be restored.
None No external Ethernet device has been attached and
detected. The Ethernet link is down.
Red The WAN interface has been disabled by the
firmware.
Red The WAN connection has lost IP connectivity with
its default gateway even though the Ethernet link is
still up. Or the WAN connection repair procedure is
still in progress.
Amber 10BaseT link detected/active traffic present.
Green 100BaseT link detected/active traffic present.
None No mobile station or Access Point has associated
with this device.
Red
The wireless interface has been disabled by the
firmware.
Amber
802.11b connection exists in this wireless
domain/active traffic present.
Green
802.11g connection exists in this wireless
domain/active traffic present.
None No external Ethernet device has been attached and
detected. The Ethernet link is down.
Amber 10BaseT link detected/active traffic present.
Green 100BaseT link detected/active traffic present.
SECTION 1, OVERVIEW
OVERVIEW