Motorola WR850G User Manual page 62

SECTION 3
3-28
Field Description
LAN Subnet Mask Enables you to create your own Subnet Mask
for your network. The Subnet Mask determines
which portion of a destination LAN IP address
is the network portion and which portion is the
host portion.
Enter a Subnet Mask address that you will use
for your network.
The default is 255.255.255.0
Default Lease Displays the Hours and Minutes of the default
Duration lease duration. Enter in a new duration.
The default is 1 week.
LAN DHCP Enables or disables the DHCP server. You can
Server only run one DHCP server on your network.
The default is enabled.
Address Pool Based on what is entered in the LAN Private IP
Begins field, the number entered here is where the
router starts handing out IP numbers. So,
using the default IP address, the next number
provided would be 192.168.10.2.
The default is 2.
Address Pool Size You are able to reserve up to 253 slots on your
DHCP server for potential clients. For example,
when using the router's default IP of
192.168.10.1, then all numbers up to
192.168.10.254 are available for use.
If you want to make available every number,
enter 253.
The default is 50.
SECTION 3, CONFIGURATION
CONFIGURATION