Samsung VP-M50 Service Manual page 80

d. Press the "FADE(MODE UP)" or
"BLC(MODE DOWN)" button of FUNCTION
so as to select the address 07.
e. Insert the Hi-8 tape to the camcorder
f. Connect the oscilloscope to the addressed Test
Point.
g. "Z.RETURN(DATA DOWN)/TITLE(DATA
UP)" button so that the IC201 PIN13 is
0.5±0.02Vp-p from SYNC tip to peak level.
h. Be sure to press the "MENU(CONFIRM)" but-
ton on FUNCTION to memorize setting.
i. Reset the power source so as to fix the new data
to the camcorder's EEPROM.
2-7. PB Output Level (Hi8)
: This adjustment is performed to set the A/D
input level to the regulated level.
a. Preparations
STANDARD COLOR BAR TAPE
RECORDED WITH SP SPEED
TAPE
*PAL
EQUIPMENT OSCILLOSCOPE
R248
TEST POINT
ADDRESS 06
NAME PB OUT-LEVEL (NOR)
b. Connect a power source.
c. Get into the VCR adjustment mode.
d. Press the "FADE(MODE UP)" or "BLC (MODE
DOWN)" button of FUNCTION so as to select
the address 08.
e. Insert a Hi-8 standard color bar tape and press
the PLAY button.
f. Connect the oscilloscope counter to the
addressed Test Point.
g. Press the "Z.RETURN(DATA DOWN)/
TITLE(DATA UP)" button so that the CN452
PIN13 is 0.9±0.02Vp-p from SYNC to peak
level.
Samsung Electronics
h. Be sure to press the "MENU(CONFIRM)" but-
ton on FUNCTION to memorize setting.
i. Reset the power source so as to fix the new data
0.5 0.02Vp-p
to the camcorder's EEPROM.
2-8. VIDEO Out Level
: This adjustment is performed to set the VIDEO
out level to the regulated level.
a. Preparations
TAPE
EQUIPMENT
OTHER
TEST POINT
ADDRESS
NAME
b. Connect a power source.
c. Get into the VCR adjustment mode.
d. Press the "FADE(MODE UP)" "BLC (MODE
DOWN)" button of FUNCTION so as to select
the address 09.
e. Insert a standard color bar tape and press the
PLAY button.
f. Connect the oscilloscope counter to the
addressed Test Point.
g. Press the "Z.RETURN(DATA DOWN)/
TITLE(DATA UP)" button so that the CN452
PIN13 is 1.0±0.02Vp-p from SYNC to peak
level.
APPROX.
0.7V
APPROX.
0.3V
Alignment and Adjustment
0.9 0.02Vp-p
STANDARD COLOR BAR TAPE
RECORDED WITH SP SPEED
OSCILLOSCOPE
CONNET THE MOINTER(75Ω)
CN452 PIN13
09
VIDEO OUT LEVEL
WHITE ( APPROX. 100% )
1.0 0.02Vp-p
H
4-41