Samsung VP-M50 Service Manual page 79

Alignment and Adjustment
TAPE 8MM (NORMAL) TAPE
EQUIPMENT OSCILLOSCOPE
OTHER
TEST POINT IC 201 PIN 13
ADDRESS 05
NAME Y-EMPHASIS IN (NOR)
2-4. Adjusting Y-Emphasis Input (NORMAL)
: This adjustment is performed to set the Y level
which is recorded in tape.
Maladjusted Y level impact to the next adjust-
ment.
a. Preparations
b. Connect a power source.
c. Get into the VCR adjustment mode.
d. Press the "FADE(MODE UP)" or "BLC(MODE
DOWN)" button of FUNCTION so as to select
the address 05.
e. Insert a Normal Tape to the camcorder.
f. Connect the oscilloscope to the addressed Test
Point.
g. Press the "Z.RETURN(DATA DOWN)/
TITLE(DATA UP)" button so that the IC201
PIN13 is 0.5±0.02Vp-p from SYNC tip to peak
level.
h. Be sure to press the "MENU(CONFIRM)" but-
ton on FUNCTION to memorize setting.
i. Reset the power source so as to fix the new data
to the EEPROM.
2-5. PB OUT LEVEL (NORMAL)
(Hi8 NORMAL PLAY BACK)
(NOMAL PLAY BACK OF Hi8 SET)
: This adjustment is perform to set the A/D
input level to the regulated level.
a. Preparations
4-40
TAPE
EQUIPMENT
TEST POINT
ADDRESS
NAME
b. Connect a power source.
c. Get into the VCR adjustment mode.
d. Press the "FADE(MODE UP)" or
"BLC(MODE DOWN)" button of FUNCTION
so as to select the address 06.
e. Insert the Standard Color Bar Tape and press
the "PLAY" button.
f. Connect the oscilloscope to the addressed Test
Point.
g. Press the "Z.RETURN(DATA DOWN)/
TITLE(DATA UP)" button so that the Q272
Emitter is 0.9±0.02Vp-p from SYNC to peak
level.
0.5 0.02Vp-p
h. Be sure to press the "MENU(CONFIRM)" but-
ton on FUNCTION to memorize setting.
i. Reset the power source so as to fix the new data
to the camcorder's EEPROM.
2-6. Y-EMPHASIS INPUT (HI8)
a. Preparations
TAPE
EQUIPMENT
OTHER
TEST POINT
ADDRESS
NAME
b. Connect a power source.
c. Get into the VCR adjustment mode.
STANDARD COLOR BAR TAPE
RECORDED WITH SP SPEED
*PAL
OSCILLOSCOPE
Q272 EMITTER
R248 (Hi8 : NORMAL PLAYBACK)
06
PB OUT-LEVEL (NOR)
0.9 0.02Vp-p
HI8 TAPE
OSCILLOSCOPE
NONE
IC201 PIN13
07
Y-EMPHASIS IN (HI8)
Samsung Electronics