Sony KP-41T25 Operating Instructions Manual page 20

4
Erase and/or add the channel you want:
To erase an unwanted channel
(1) Make sure the cursor (z) is beside ERASE.
(2) Press CH + or – to select the channel you want
to erase.
CH
(3) Press RETURN.
The indication "–" appears beside the channel
number, showing that the channel is erased
from the preset memory.
RETURN
To add a channel that you want
(1) Press + > or – . to select ADD.
(2) Press 0 – 9 button to select the channel you want
to add and press ENTER.
1 2 3
4 5 6
7 8 9
ENTER
0
(3) Press RETURN.
The indication "+" appears beside the channel
number, showing that the channel is added to
the preset memory.
RETURN
20 -EN
Getting Started
Selected channel number
CHANNEL ERASE / ADD
1 5
ERASE
ADD
MENU
S e l e c t t h e c h a n n e l .
Us e RETURN E x i t MENU
Selected channel number
CHANNEL ERASE / ADD
1 0
ERASE
ADD
MENU
Us e RETURN E x i t MENU
5
To erase and/or add other channels, repeat
step 4.
6
When you finish, press MENU.
MENU
Notes
• If you erase or add a VHF or UHF channel, the cable TV
channel with the same number is also erased or added, and
vice versa.
• If more than 90 seconds elapse after you press a button, the
menu disappears automatically.
• Erasing and adding channels are also available for the AUX
input (KP-41T25 only).
Adjusting convergence
(CONVERGENCE)
The projection tube image appears on the screen in
three layers (red, green and blue). If they do not
converge, the color is poor and the picture blurs. To
correct this, adjust convergence.
You do not have to do this procedure if you execute
AUTO SET UP (page 18). Do this procudure only
when you want to adjust it manually.
1
Press MENU.
2
Press + > or – . to move the cursor (z) to
SET UP and press RETURN.
3
Press + > or – . to move the cursor (z) to
CONVERGENCE and press RETURN.
The CONVERGENCE adjustment screen appears.
R
CONVERGENCE
G
| RED
–
RED
B
| BLUE
–
BLUE
MENU
B
Us e RETURN E x i t MENU
G
R
R=Red
G=Green
B=Blue