Samsung SDE-4001 User Manual page 46

using the DVR
Recording Color Tags
Color
White
Orange
Blue
Green
Each press of a selected cell will cycle through <No Recording>-<Continuous>-<Event>-
<Both(Cont&Evnt)>.
Event Record Duration
You can set the beginning and ending point of a recording on an event.
Using the mouse may help make setup easier.
1. Use the up/down buttons (▲▼) in <Record> window to
move to <Event Record Duration>, and press [ENTER]
button.
Use direction buttons (▲▼◄ ►) to move to a desired
2.
item, and set the value.
•
Pre Event : The recording of an event will start at a
pre-determined time prior to the actual occurrence of the event.
If it is set to 5 seconds, the recording begins from 5
seconds before the event.
•
POST Event : The recording will continue for a
pre-determined time after the actual end of an event.
If it is set to 5 seconds, the recording ends in 5 seconds after an event.
3. When the event recording duration setup is done, press <OK>.
46_ using the DVR
Function
No Recording
Continuous
Event
Both(Cont&Evnt)
Description
No schedule / event recording
Scheduled recording only
Event recording only
Both scheduled / event recordings
Event Record Duration
CH Pre Event
1 OFF
2 OFF
3 OFF
4 OFF
5 OFF
6 OFF
7 OFF
8 OFF
POST Event
1 min
1 min
1 min
1 min
1 min
1 min
1 min
1 min
Previous/Next Page
OK Cancel