Number Of Rings - AT&T EL52106 User Manual

Answering system
Answering system settings

Number of rings

You can set the answering system to answer an incoming call after 2, 3, 4, 5,
or 6 rings. You can also select Toll saver, which is explained below. Unless
you change it, the answering system answers an incoming call after
three rings.
To set the number of rings:
Press MENU/
1.
2. Press CID or
then press
MENU
3. Press CID or
then press
MENU
CID or
4. Press
press /SELECT.
MENU
CID or
5. Press
2, 3, 4, 5, 6 or Toll saver.
• Toll saver - The answering system answers a call after two rings when
you have new messages, and after four rings when there are no new
messages. This feature allows you to check for new messages and avoid
paying long distance charges if you are calling from out of your local area.
/SELECT to save your setting.
6. Press
MENU
NOTE: If you subscribe to a voicemail service offered through your telephone service
provider, see Answering system and voicemail indicators on page 60.
when the handset is idle.
SELECT
DIR to scroll to Answering sys,
/SELECT.
DIR to scroll to Ans sys setup,
/SELECT.
DIR to scroll to # of rings, then
DIR to scroll and choose among
57
# of rings
ECO
3
ECO