Connecting To A Paired Bluetooth Device; Switching Between Connected Devices; Clearing The Soundbar's Bluetooth ® Pairing List - Bose Solo 5 Owner's Manual

Connecting to a paired Bluetooth
You can stream audio from a Bluetooth device to the soundbar.
Note: If there are multiple devices stored in the soundbar's pairing list, it may take
a minute or two for the paired device to connect. The soundbar's Bluetooth
indicator shows connection status (see page 22).
1. On the remote control, press .
The soundbar connects to the last two devices that streamed to
your soundbar.
2.
Once connected, on the Bluetooth device, play music.
If you cannot stream audio from a paired device
The soundbar may have lost connection to your device. Check the soundbar's
Bluetooth indicator. If the paired device is out of range of the soundbar, move your
device within range.

Switching between connected devices

The soundbar supports multi-point connectivity, which allows you to seamlessly
switch playing music between connected devices.
The last two devices that streamed to the soundbar remain connected. During
playback, you can pause audio on the streaming device, and then play music from
another connected device.
1.
Pause music from the streaming device.
2.
On another connected device, play music.
3.
Repeat steps 1 and 2 to switch between connected devices.
Clearing the soundbar's Bluetooth
pairing list
When you pair a Bluetooth
soundbar's pairing list. You may need to clear the pairing list if you cannot connect
to a device. Once you clear the list, you need to pair the device again.
1.
Press and hold
2. On your mobile device, delete Bose Solo 5 system from the Bluetooth menu.
The soundbar emits a tone and is ready to pair to a device (see page 20).
device to the soundbar, the connection is stored in the
®
for 10 seconds, until the Bluetooth indicator blinks blue.
Bluetooth
device
®
®
English - 21
®