Programming The Universal Remote - Bose Solo 5 Owner's Manual

Using the System

Programming the universal remote

You can program the universal remote to control your source, such as a TV, DVD/
Blu-ray Disc player, cable/satellite box, game system or DVR, by entering the
™
code for your source's brand. There may be several codes for your source. You
may need to perform this procedure multiple times to locate the correct code.
Locate your source's code
1.
Power on your source.
2.
Locate the code for your source's brand in the Universal Remote Device
Codes book (provided).
Enter your source's code
1. On the remote control, press and hold the appropriate source button until all
six source buttons glow, then release.
For example, to program your TV, press and hold
buttons glow, then release.
The appropriate source button continues to glow.
2. On the number keypad, enter the code for your source's brand and press + on
the volume button.
Test your source's code
1. Test your source for basic functions. Follow the instructions for your source:
• TV: press the channel buttons. Press
Press and
• Cable/satellite box: press
and to navigate.
• DVD or Blu-ray Disc
Press and
• Game system: press
2.
Based on your source's response to basic functions:
• Remote responds accurately: press
save your settings.
• Remote does not respond or does not respond accurately:
– If your source button glows: press + on the volume button to move to
the next code. Repeat steps 1-2 in "Test your source's code". You may
need to repeat this procedure 30 or more times. If all six buttons blink
three times, you have cycled through all codes for your source.
– If your source button is off: your remote exited programming mode.
Repeat steps 1-2 in "Enter your source's code" and steps 1-2 in "Test
your source's code".
Tip: After you exit programming mode, press the appropriate source button to
use your source.
Note: Your source may not be compatible with universal remote controls. Refer to
your source's owner's guide for more information.
16 - English
to navigate.
player: press
™
to navigate.
and to navigate through your menu.
. The settings menu appears.
. The programming guide appears. Press
. The settings menu appears.
to exit programming and
until all six source