Communications - Network Adapter - Dell OptiPlex 9020 Technical Manualbook

Architecture
Integrated Memory
Data Transfer Mode
(example: Bus-Master
DMA)
Power Consumption
(full operation per data
rate connection speed)
Power Consumption
(standby operation)
IEEE Standards
Compliance
Hardware
Certifications
Boot ROM Support
Network Transfer Mode
Network
Transfer Rate
10BASE-T (full-duplex)
20 Mbps
100BASE-TX (half-
duplex) 100 Mbps
100BASE-TX (full-
duplex) 200 Mbps
1000BASE-T (full-
duplex) 2000 Mbps
Environmental
Operating
Temperature
Operating Humidity
Operating System
Driver Support
Manageability
Management
Capabilities Alerting
1 This term does not connote an actual operating speed of 1 Gb/sec. For high speed transmission,
connection to a Gigabit Ethernet server and network infrastructure is required.
Communications – Network Adapter
Broadcom NetXtreme
10/100/1000 PCIe
Gigabit1 Networking
Dell - Internal Use - Confidential
32 Room for text | Dell Inc., 2014
power state
535mW (Max)
176mW (Max)
EEPROM (located in SPI)
10 Mb (full/half-duplex)
100 Mb (full/half-duplex)
1000 Mb (full-duplex)
0° C to 85° C (32° F to 185° F)
20% to 80% (non-condensing)
Windows 8.1 64, Windows 8 32/64, Windows 7 32/64
WOL, PXE 2.1
Intel® Standard Manageability, Intel Core 2 Duo/
Quad Processor with vPro Technology
MT SFF
802.3
n/a
USFF
Specification
Revision 1.1
Yes
Yes
535mW (Max.)
45mW (Max.)
802.3
N/A
N/A
10 Mb (full/half-
duplex)
100 Mb
(full/half-duplex)
1000 Mb (full-
duplex)
0° C to 70° C
IC level 40~60%
RH
PCB level 0~90%
RH
Windows 7
32/64, Windows
8.1 /64
Ubuntu
WOL, PXE 2.1
N/A
Micro