Handle Positions; Tools; Select Proper Tool; Removing Hose - Hoover UH72460 Owner's Manual

handle POsitiOns

2.6
2.6 The handle of your
cleaner has two positions:
upright for storage and
w h e n
using cleaning

tools;

operating position for
general operation on
carpet and floors; hold
nozzle with foot (E) and
pull handle back.
3. tOOls
Tools allow for cleaning surfaces above the floor and for reaching hard to clean areas.
The vacuum is ready for tool use when handle is in upright position.

seleCt PrOPer tOOl

2-in-1 Combination tool
3.1
A b

reMOVinG hOse

3.2 To remove hose for
3.2
tool use, press the hose
release button and pull
hose end out.
To lock back into place,
push hose into hose tube
until you hear a click.
CAUTION
! !
To reduce the risk of injury from moving parts-keep
fingers away from opening - Unplug before
servicing.
ManeuVerable
2.7 Lower handle and
twist to maneuver under
and around furniture.
E
3.1
A. Crevice Tool may be used in tight spaces,
corners and along edges in such places as dresser
drawers, upholstered furniture, stairs and baseboards.
B. Dusting Brush may be used for furniture, table tops,
books, lamps, lighting fixtures, venetian blinds,
baseboards, shutters, and registers.
7
2.7