1. VaCuuM asseMblY
CartOn COntents
1.1
A. Handle
B. Wand
C. Vacuum Base and Dirt Cup
D. 2-in-1 Combination Tool
Remove all parts from carton and identify
each item shown.
Make sure all parts are located before
disposing of packing materials.
attaCh handle
1.2 Insert handle into wand until secure. Press lever (A) on
vacuum base to insert handle section.
attaCh dirt CuP
1.3 Place bottom of dirt cup into vacuum body first.
Pivot cup into vacuum. Press down on the dirt cup release
button to secure into place.
POsitiOn tOOls
1.4 For storage mode, push dusting brush all the way up
onto crevice tool.
1.5 Insert 2 in 1 combination tool into tool storage area
(B) on side of vacuum.
A
b
C
1.2
A
1.3
1.5
1.4
b
5
D