Howto Use; Cleaner Description; Upright Cleaner; Handle Positions - Hoover TurboPOWER Owner's Manual

2. How to use

Cleaner description

2-1
1
2
3
16
15
14
13
12
10
11
Operate cleaner only at voltage specified on data plate on bottom of cleaner.
This cleaner is intended for household use.
2-2
B
A
ON-OFF switch
To turn cleaner ON, push switch (A) up.
To turn cleaner OFF, push switch down.
N o t e: To reduce the risk of electric shock,
this appliance has a polarized plug (one
blade is wider than the other). This plug
will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install the
p roper outlet. Do not change the plug in
any way.
To insure that the filter bag is inflated, plug
c o rd into electrical outlet and turn cleaner
ON. With handle in upright position, pull
back on handle until front of cleaner (B) is
lifted off the carpet.
This insures that the paper bag is inflated.
3
4
5
6
3
7
8
9
2-3

Handle positions

The handle of your cleaner has three
positions; upright for storage and when
using cleaning tools; operating for
general operation on carpet and floors;
low for reaching under low furniture. Step
on handle release lever to lower handle.
The assembled cleaner will look like the
drawing.
1. Handle
2. ON/OFF switch
3. Cord hooks: wrap cord around
hooks for storage. The top hook can
be rotated right or left for easy cord
release.
4. Bag door latch
5. Bag door
6. Stair cleaning handle: located on
lower edge of bag.
17
7. Handle release lever: step on lever
to lower handle to operating or low
position.
8. Cleaner base
9. Carpet height control: slide knob to
18
correct setting for height of carpet
being cleaned.
10. Furniture guard: helps prevent
cleaner from marking furniture.
11. Headlight
19
12. Hose door
13. Hood
14. Hose
15. Extension wand
16. Tool rack
17. Dusting brush
18. Crevice tool
19. Furniture nozzle
2-4
A
Transporting cleaner
To move your cleaner from room to
room, put handle in upright position, tilt
cleaner back on rear wheels, and push
forward (A).
The cleaner can also be moved by
lifting it as shown in (B)
B
7