Obtaining An Ip Address For An Ethernet Connection; Configuring Tcp/Ip; Configuring Tcp/Ip In Windows Xp - Motorola SURFboard SBV6120E Installation Manual

Obtaining an IP Address for an Ethernet Connection

To obtain the IP address for your computer's network interface, use one of the following options:
•
Retrieve the statically defined IP address and DNS address
•
Automatically retrieve the IP address using the Network DHCP server
The Motorola SBV6120 digital voice modem provides a DHCP server on its LAN. Configure your
LAN to obtain the IPs for the LAN and DNS server automatically.

Configuring TCP/IP

You will not have to configure the SBV6120 digital voice modem. However, you must ensure
that all client computers are configured for TCP/IP. Your cable provider may provide additional
instructions to set up your computer.
Note: For Macintosh or UNIX systems, follow the instructions in the applicable Macintosh or UNIX user
documentation.

Configuring TCP/IP in Windows XP

1. Open the Control Panel.
2. Double-click Network Connections to list the Dial-up and LAN or High-Speed Internet
connections.
3. Right-click the network connection for your network interface.
4. Select Properties from the drop-down menu to display the Local Area Connection Properties
window. Be sure Internet Protocol (TCP/IP) is checked.
5. Select Internet Protocol (TCP/IP) and click Properties to display the Internet Protocol
(TCP/IP) Properties window.
6. Select Obtain an IP address automatically and Obtain DNS server address
automatically.
7. Click OK to save the TCP/IP settings and exit the TCP/IP Properties window.
8. Close the Local Area Connection Properties window and then exit the Control Panel.
After configuring TCP/IP on your computer, perform the applicable procedure to verify the IP
address.
3 Installing the Digital Voice Modem 18
B