Onkyo TX-8020 Instruction Manual page 27

Listening to the Radio
■ Name Edit
You can enter a custom name for radio preset for easy
identification. When entered, the custom name will
appear on the display.
The custom name is edited using the character input
screen.
1 Select the preset that you want to edit the
name.
2 Press the [SETUP] button on the remote
controller.
3 Use the arrow []/[] button to select
"Name Edit," and then press [ENTER].
4 Use the arrow []/[]/[]/[] button to
select a character, and then press [ENTER].
Repeat this step to enter up to 8 characters.
5 When you've finished editing the name and
want to store it, be sure to use the arrow
[]/[]/[]/[] button to select "OK" and
then press [ENTER]. If you fail to do this,
the name won't be saved.
See the following table for information about the
character strings that can be input.
There are two patterns of character string: pattern 1
containing mainly lowercase characters, and pattern
2 containing mainly uppercase characters.
You can use the / buttons to select character
strings within each pattern. Use the / buttons to
select the character that you want to input, and press
the ENTER button. If the displayed character string
pattern does not contain the character you want to
input, use the / buttons to display the [Shift
BS OK] character string, use the / buttons to
—Continued
select "Shift," and press the ENTER button to make
the other character string pattern appear.
1
2
*1
Shift :
Switches the displayed character.
(Left)/(Right):
Select these to move the cursor within the Name
input area.
Space:
Enters a space character.
*2
BS (Back Space) :
"Back Space" moves the cursor backward one
character space. In addition, "Back Space"
deletes the character to the left of the cursor.
OK:
Specifies that the entry is complete.
Tips:
*1 You can also perform this on the remote
controller by using [D.TUN].
*2 By pressing [CLEAR] on the remote controller,
you can delete all characters in the input.
6 Press the [SETUP] button on the remote
controller to complete the setting.
Notes:
• This procedure can also be performed on the receiver
by using [SETUP], TUNING []/[], PRESET []/
[], and [ENTER].
• Press [RETURN] to return to the previous menu.
• This procedure will be cancelled if the [SETUP]
button is pressed before step 5.
■ Switching the Display
When receiving AM or FM, you can press the remote
controller's [DISPLAY] button to switch the display
between the name you specified in Name Edit and the
frequency that's being received.
27
En-