Onkyo TX-8020 Instruction Manual page 26

Listening to the Radio
Presetting AM/FM Stations
Number
buttons
D.TUN
& / ( / # / 5
SETUP
You can store up to 40 of your favorite AM/FM radio
stations as presets.
Presetting FM/AM stations is performed by the receiver.
1 Tune to the AM/FM station that you want to
store as a preset.
2 Press the [MEMORY] button.
The preset number flashes.
3 While the preset number flashes (about 8
seconds), use the PRESET []/[] buttons
to select a preset from 1 through 40.
4 Press the [MEMORY] button again to store
the station or channel.
The station or channel is stored and the preset
number stops flashing.
Repeat this procedure for all of your favorite AM/
FM radio stations.
26
En-
—Continued
PRESET C/U
MEMORY
TUNING MODE
DISPLAY
ENTER
■ Selecting Presets
To select a preset, use the remote controller's
arrow []/[] buttons or the receiver's PRESET
[]/[] buttons.
■ Selecting Preset by entering Preset number
You can tune to AM and FM stations directly by entering
the appropriate preset number.
1 Press the remote controller's [D.TUN]
button.
(Actual display depends on the country.)
2 Within 8 seconds, use the number buttons
to enter the preset number of the radio
station.
■ Deleting Presets
1 Select the preset that you want to delete.
See the previous section.
2 While holding down the [MEMORY] button,
press the [TUNING MODE] button.
The preset is deleted and its number disappears
from the display.